Engine Cranking Rectifier

Product Details:

With the constant support of experienced professionals, we are offering optimum quality Engine Cranking Rectifier. These are known for its resistance to chemicals, abrasion proof, and excellent tensile strength. In addition to this, manufactured using modern machines, we offered these products in various dimensions.


General specifications:

Input:

• 230volts 1phase/415v 3phase(3phase 3/4 wire) 50Hz.
• 115volts 1phase/200v 3phase(3phase 3/4 wire) 60Hz.
• Variation: voltage--- +/- 10%, frequency--- +/- 10%.

Output:

• 6v/12v/24v/_ _ _ _/110v/220v/360v D.C. or as per customer specification.
• Regulation: +/- 1%, Ripple: <2% , Voltage adjustment: Float -- +/- 10%, Boost-- +/- 15%.
• Configuration: Half controlled/ Full controlled/ 12 pulse/24 pulse /IGBT rectifier.

Protections:

Input:

• single/triple pole thermal/magnetic circuit breakers.
• b) over/under voltage, Single phasing , Reverse phasing .
• c) surge suppression.

Output:

D.C/Battery/Load:

• Over/under voltage.
• Over current, short circuit.
• MCB/MCCB/DCCB
• Earth fault.
• Soft start.
• Reverse polarity.

Communication(optional):

• RS-232,RS-485,SCADA,event logging.

Climatic Conditions:

• Temperature: -20degC to +50degC air temperature in shade. b) Humidity (relative): Minimum 10%-Maximum 95%
• Height above mean sea level: 20000 ft. c) Dust storm protection d) Tropical fungicidal treatment to all devices.

 

Standards followed:

• IS 5921/1249: Copper clad base material in electrical/ electronic equipments.
• IS 6297/2026: Transformers and inductors. IS 1248: Indicating instruments
• IS 6553: Environmental requirements for semiconductors and Integrated circuits.
• IS4064: Air break switches IS 8828: MCBs IS 9224: HRC fuses
• IS 6619: Semiconductor Rectifier equipment safety IS 613: Copper bus bars
• IS 2959: Contactors. IS 3231: Electrical relays IS 13703: low voltage fuses
• IS 4540: Mono Crystalline Semiconductor rectifier assembly
• IS 4237: general requirements for switch gear and control switches
• IEC 62040-2: Electromagnetic conduction and interference .EMC (EMS/EMI) IEC 61000-4,
• Surge Protection 120V (IEEE C62.41)/230V(IEEEC61000-4-5 LEVEL 3) Safety UL 1778.CE

 

Additional Information:

• Item Code: 28V-250A